|
|
Cosmetic Dentistry Columbus North Carolina
Country: United States
State: North Carolina
City: Columbus
Cosmetic Dentistry Procedures: Teeth Whitening
Whitening of the teeth is performed for patients who desire a brighter smile. Tooth whitening can be performed to reduce discoloration and staining, or simply to provide the patient with whiter, brighter teeth.
We've prepared a primer on teeth whitening to help improve your understanding of what teeth whitening can and do for a patient. Just click on the next page graphic below to get started. Or, if you want to jump to a specific topic, use the handy outline. How long does teeth whitening last?
Teeth whitening is not a permanent procedure. Results can last for one to or more years, depending upon your personal habits. In most cases, the whitening procedure is very effective and the patient is pleased with the results. Types of Teeth Whitening Procedures
There are a few teeth whitening procedures available that correct discoloration of the teeth by removing the brown and yellow staining. While each work effectively, there are advantages and disadvantages to each procedure dependent upon your objectives and commitment to the processes. The type of procedures available should be discussed with your cosmetic dentist, and a they will recommend the most appropriate teeth whitening procedure for you.
BRITESMILE TEETH WHITENING (In-Office)
Using a specail light with a whitening gel, this is an in-office bleaching system. It is often followed up with an at-home bleaching kit if needed.
The translucent bleaching gel is applied to the teeth and a specail activating light source is used to activate the crystals to absorb the energy from the light and penetrate the teeth enamel to increase the lightening effect on the teeth. The length of time in the cosmetic dentist's chair depends on the degree of discoloration you have, but two hours is common.
Advantage: One visit is usually all it takes for a bright smile. The tooth whitening treatment typically costs $600.
Disadvantage: The sudden change of color is likely to be noticed by those around you immediately.
LASER BLEACHING (In-Office)
Using a laser with a whitening gel, this is an in-office bleaching system.
The translucent bleaching gel is applied to the teeth and a laser light is used to activate the crystals to absorb the energy from the light and penetrate the teeth enamel to increase the lightening effect on the teeth. The length of time in the cosmetic dentist's chair depends on the degree of discoloration you have.
Advantage: One visit is usually all it takes for a bright smile.
Disadvantage: The sudden change of color is likely to be noticed by those around you immediately. This is the more expensive of the procedures available, but also the quickest.
LASER BLEACHING (In-Office)
Using a laser with a whitening gel, this is an in-office bleaching system.
The translucent bleaching gel is applied to the teeth and a laser light is used to activate the crystals to absorb the energy from the light and penetrate the teeth enamel to increase the lightening effect on the teeth. The length of time in the cosmetic dentist's chair depends on the degree of discoloration you have.
Advantage: One visit is usually all it takes for a bright smile.
Disadvantage: The sudden change of color is likely to be noticed by those around you immediately. This is the more expensive of the procedures available, but also the quickest.
CUSTOM FIT TRAY BLEACHING (In-Home)
A custom fitted tray is worn over your teeth. A small amount of the bleaching gel is placed in the tray and worn for a brief amount of time each day. This is the most common technique because it's easy to use and costs less. Impressions are taken of your mouth and a thin custom made plastic tray is made which you take home and wear for about one to two hours per day. While some results may be seen in a couple days, it usually takes one to two weeks to see the full whitening of your teeth. This procedure is sometimes used in conjunction with the in-office laser bleaching if you have severe discoloration (dark grey or purple) or internal teeth staining.
Advantage: A gradual whitening of your teeth over time will be less noticeable to others that you're undergoing this procedure. The cost is relatively low.
Disadvantages: This procedure will require two to four visits to the cosmetic dentists office. How much does tray bleaching teeth cost?
The standard fee for tray bleaching teeth procedures is about $500 or more in most cases. Depending on your cosmetic dentist, this may or may not include office visits. Costs can vary depending upon the area of the country you live in and the type of whitening treatment you undergo.
Generally speaking, the price of teeth whitening increases with the number of in-office treatments required by the patient. Dental insurance does not typically cover the cost of the teeth whitening procedure. There are a few teeth whitening procedures available that correct discoloration of the teeth by removing the brown and yellow staining. While each work effectively, there are advantages and disadvantages to each procedure dependent upon your objectives and commitment to the processes. The type of procedures available should be discussed with your cosmetic dentist, and a they will recommend the most appropriate teeth whitening procedure for you.
LASER BLEACHING (In-Office)
Using a laser with a whitening gel, this is an in-office bleaching system. The translucent bleaching gel is applied to the teeth and a laser light is used to activate the crystals to absorb the energy from the light and penetrate the teeth enamel to increase the lightening effect on the teeth. The length of time in the cosmetic dentist's chair depends on the degree of discoloration you have.
Advantage: One visit is usually all it takes for a bright smile.
Disadvantage: The sudden change of color is likely to be noticed by those around you immediately. This is the more expensive of the procedures available, but also the quickest. How much does laser teeth whitening cost?
Costs can vary depending upon the area of the country you live in and the type of whitening treatment you undergo. Laser teeth whitening is typically over $1000. for the complete procedure.
Generally speaking, the price of teeth whitening increases with the number of in-office treatments required by the patient. Dental insurance does not typically cover the cost of the teeth whitening procedure. COSMETIC GUM SURGERY
What is cosmetic gum surgery?
Your gum tissue is like a frame that provides form and shape to the top of your tooth. A less than attractive smile results when the integrity of the gum is compromised or the actual gum between your teeth becomes weak. Usually due to poor hygiene (gum disease), you actually begin to lose gum tissue. Cosmetic dentistry provides many cosmetic solutions such as composite resin bonding, crowns, and veneers to create a great smile. These solutions are usually part of an overall strategy which may involve cosmetic gum surgery. Used to correct a 'gummy smile' (a significant portion of your gum is exposed when you smile), cosmetic gum surgery is the procedure of lengthening your teeth from the neck of the tooth upwards. Your teeth then appear to be longer and much less gum is seen when you smile.
The "Long in the Tooth" Smile - Cosmetic gum surgery, or periodontal plastic surgery, can correct almost any deformity or gingival problems preventing you from a beautiful smile. As we age, our gums may shrink and recede which makes our teeth look longer. While this is often age-related, it can also occur due to a bad bite. A cosmetic dentist or a periodontist can correct this to such an extent, that you'll have a very youthful appearing smile.
The "Gummy Smile" - This is a problem where your teeth appear to be too short. Gum sculpting is often the solution. To solve this, a dentist uses a laser to remove the excess tissue of your "gummy" smile, which then exposes more of your tooth. Pros and Cons of Cosmetic Gum Surgery
Advantages:
Healing is usually quick and your more youthful and beautiful smile is obvious early on. It has been reported that cosmetic gum surgery additionally improves the health of your gums. The procedure to correct receding gums may even reduce your tooth sensitivity to cold or hot foods or beverages while protecting your roots from decay and lessening further gum shrinkage.
Disadvantages:
Cosmetic gum surgery is of course, surgery. Surgery is often performed in segments under a local anesthetic - unless your entire mouth is undergoing this procedure at once, then a general anesthesia is typically used. ROOT CANALS
Dental Root Canals for Your Teeth
Many of us have heard the comparisons of painful things to the root canal procedure. It's not that bad. There are tiny canals within your tooth that may become infected. This leads to the pulp inside your tooth also becoming diseased. Either your dentist or an endodontist to remove any infection performs the root canal procedure. The canals are then filled and the tooth receives either a filling or a crown. Crowns are more common in most cases as they add strength to the tooth itself. The procedure itself takes one to two visits.
What are Root Canals?
There are tiny canals within your tooth that may become infected. This leads to the pulp inside your tooth also becoming infected as well. Either your dentist or an endodontist to remove any infection performs the root canal procedure. The canals are cleaned and then filled and the tooth receives either a filling or a crown. Who is a candidate for a root canal?
If your tooth is infected or there's severe damage to the pulp, a root canal will be recommended. An untreated cavity is the most common cause for this infection. The pulp inside the tooth can become inflamed from trauma or extensive restorative work. It can even be affected from a series of fillings being applied in a short period of time. This inflammation usually leads to infection. Pain in the tooth is the most common and obvious symptom. Overview of Tooth Veneers
Often an alternative to crowns, veneers are very thin pieces of specially-shaped porcelain or plastic that are glued over the front of your teeth with little or no anesthesia needed. They are the cure for teeth that are severely discolored, chipped, have small holes or pits, misshapen or crooked, or for the correction of unwanted or uneven spaces. Unlike crowns, veneers won't require the dentist to remove much of the tooth itself in most cases. It is important to ask your cosmetic dentist how much tooth will be removed. In some cases more tooth will need to be removed, which may increase the risk of trauma to the tooth. Veneers are created from an impression taken in your cosmetic dentist's office. Your custom veneer is then glued directly onto your tooth. Typically costing less than crowns, veneers won't stain, making veneers a very popular solution for many people seeking that perfect smile. Strong and very durable, veneers last from ten to fifteen years, and come in colors that will brighten dark teeth without the worry of them changing color.
How are Tooth Veneers Attached to your Tooth?
In your first appointment, it is important to initially discuss with your cosmetic dentist that you will want to "try in" your veneers with temporary cement that is the same color cement as will be used for the permanent attachment. During this "try-in" phase, be sure to look at your veneers in natural light in addition to the office light. Teeth are prepared for veneers by lightly buffing to allow for the small added thickness of the veneer. Veneers are thin like contact lenses, and will usually only need tooth reduction of 0.5mm to 1.0mm. If a drastic change is being made for the result you want, reduction may be 1.0mm to 2.0mm. A mold is taken of the teeth, from which the veneers are modeled after. Temporary veneers will be placed and worn until your permanent veneers are ready. While wearing the temporary veneers, advise your cosmetic dentist of any adjustments or changes you would like made, such as in shape or size. These changes will be translated into your permanent veneers, so good communication between you and your dentist is important in achieving your new smile.
Your dentist places the veneers with water or glycerin on the teeth to verify their perfect fit and the shade or color. The color cannot be changed after the veneers are adhered to your teeth. The tooth is then cleansed with chemicals to achieve a durable bond. Once the glue is between the veneer and your tooth, a light beam is used to harden the glue/cement. Pros and Cons of Tooth Veneers
Advantages:
Porcelain veneers are common in creating new smiles and smile makeovers. With porcelain veneers, you can have the smile of your dreams in a very short period of time. Typically veneers are difficult to stain, making veneers a very popular solution for many people seeking that perfect smile. Strong and very durable, veneers last from ten to fifteen years, and come in colors that will brighten dark teeth without the worry of them changing color. Veneers are typically done in only two one and a half hour long appointments, and can actually strengthen your tooth.
There is no additional maintenance, other than a follow-up visit to your cosmetic dentist and proper brushing and flossing on a daily basis.
Finally, a whiter smile gives people to whom you are speaking a place to focus on and gives you a friendlier appearance.
Disadvantages:
It takes roughly a week or two of a period of adjustment to get used to your teeth that have been changed in color, size, spacing and shape. While very little tooth is removed in most cases, there are situations where more tooth must be removed which increases the risk of trauma to the tooth. The amount of tooth to be removed for the veneers should be discussed with your cosmetic dentist beforehand.
It is common to have minor sensitivity after your teeth have been prepared for your veneers while wearing the temporary veneers. Some people can experience a difference in speech, usually pronouncing "s" and "f" sounds. This is corrected through minor adjustments your cosmetic dentist can make to your veneers. Veneers are very reasonable facsimiles of natural teeth, but not perfect replacements for natural teeth. It's common to see slight variations in the color of veneers upon very close inspection, as with natural teeth. It can take up to a month or two before your new smile feels a part of you.
If you suffer from bruxism, clenching or grinding of your teeth, veneers can be damaged, chipped or cracked from this. If you suffer from bruxism, speak with your cosmetic dentist about wearing a mouth guard at night to protect your new smile. TOOTH CONTOURING AND RESHAPING
What is tooth contouring and reshaping?
Tooth reshaping, or contouring, is one of few instant treatments now available in cosmetic dentistry. Dental reshaping and contouring is a procedure to correct crooked teeth, chipped teeth, cracked teeth or even overlapping teeth in just one session.
The dental contouring procedure can even be a substitute for braces under certain circumstances. It is also a procedure of subtle changes. A few millimeters of reduction and a few millimeters of tooth-colored laminate can create a beautiful smile when performed by a cosmetic dentist, with no discomfort to you. Tooth reshaping, or dental contouring, is commonly used to alter the length, shape or position of your teeth. How much do dentures cost?
Costs will vary depending on where you live and your needs. Prosthodontists' prices are typically between $500 to $2,500 per upper or lower arch. Cosmetic Dentist fees are usually $300 to $1,200 per arch. This is a procedure for which you should definitely research your dental insurance coverage. Much of the cost is often covered. Pros and Cons of a Dentures
Advantages:
Dentures definitely provide a great smile with a very natural appearance. They're made of very durable materials and last very long when properly taken care of. Typically dentures last from five to ten years. They also correct several problems, from speech to chewing, for many patients.
Disadvantages:
There's no doubt that dentures take a little getting used to. There is maintenance involved, and initial speech issues to overcome (these are temporary and last only a couple of days). Mouth irritation or sores may occur, but are usually caused by poor dental hygiene, and not removing your dentures when needed. It is common that your mouth change over the life of your dentures, so even though they last long, they may need to be replaced to achieve a better fit before they are worn out. With a denture a person typically chews at only 15-23% efficiency compared to a person chewing with their natural teeth. In the case of a full upper denture, the upper palate is covered which can reduce taste of foods you're chewing. What are dental implants?
Dental implants are fixtures of titanium which are surgically screwed into your jaw bone. The implant is an anchor for a naturally-appearing false tooth or a set of false teeth. The success rate of dental implants depends on where the implants are placed and their purpose. They are typically best placed in the front portion of your lower jaw. Implants are great for replacing missing teeth. It is important that you have enough bone in the area of the missing teeth for the implants to be attached to. Implants are not only used to replace one tooth, but rather people missing most, if not all, of their teeth benefit greatly as well. Implants are increasingly being used to replace certain types of bridges and removable partial dentures. Overview of Dental Implants
Implants are surgically placed in your jaw bone while under anesthesia. It is a very time consuming procedure when having many implants placed. As this procedure is surgical, it is very important to research and find a well credited cosmetic dentist that you are comfortable with. For some people there are varying degrees discomfort or pain, which subsides in a couple of days. As with similar types of surgery, bruising and minor swelling might also develop shortly after the procedure.
How are Dental Implants Attached in Your Mouth?
The implant procedure is a surgical placement of the implant or implants in your jaw bone which requires a three to six month healing period before the implant restoration to replace the missing tooth or teeth. During this healing time, the bone grows in and around the titanium implant creating a very strong support. Dental implants can be rejected. Usually they are replaced with another implant of a slightly larger size. The rejection or "failure" rate is minimal, only 1 to 2% of all implant procedures. You must go without wearing your dentures for one day to two weeks after an implant placement. After the implant has "taken" and you have sufficiently healed, a very natural crown is placed on the implant.
When missing one tooth, your cosmetic dentist may use a Flipper to fill the space. A Flipper is a false tooth to temporarily take the place of a missing tooth before the permanent crown is placed on the implant. A Flipper can be attached via either a wire or a plastic piece that fits in the roof of your mouth. Flippers are meant to be a temporary solution while awaiting the permanent crown to be placed on your implant(s).
If you're missing one tooth or all of your teeth, implants may well be for you. So long as you have enough bone in the area of the missing tooth to facilitate the anchorage of the implants, this procedure can yield terrific results. If you don't have enough bone for this purpose, a bone graft may be necessary. A procedure of building up the bone is known as Bone Grafting. Bone grafting is common with dental implants. The bone that is used is one of three types. The preferred bone to use is taken from other areas of your mouth or collected in a suction device as the drilling of the sites for dental implants occurs. Sometimes bone is taken from areas such as a hip (this requires an orthopedic surgeon and an operating room). The third source for needed bone is a synthetic type. This is the least preferred type of bone to be used for this procedure. Types of Dental Implant Procedures
Implants rely on titanium fixtures inserted into the jawbone. Most implants are made of titanium, which is very effective at fusing with living bone (osseointegration). There are three types of dental implants which your cosmetic dentist will discuss with you:
Root Form Implant
This screw type implant is shaped like the root of a tooth. This is the most commonly used implant and is used where there is plenty of width and depth to your jawbone. If your jawbone is too narrow or short for placement of the Root Form implants, bone grafting may be needed to allow for their placement. After you've received anesthesia, your cosmetic dentist will expose an area of your jawbone and prepare the bone for the implant. The number of incisions and bone preparations depend on how many implants you need. The implant will be set into place and your gums are closed with stitches. It will take three to six months for healing. After you've fully healed, your implant is uncovered and an abutment is attached.
Plate Form Implant
If your jawbone is too narrow for bone grafting, a Plate Form implant is placed into your jawbone. The Plate Form implant is unique for this purpose as it has a flat and long shape for a better fit into a narrow jawbone. After you've received anesthesia, your cosmetic dentist will expose an area of your jawbone and prepare the bone for the implant. The number of incisions and bone preparations depend on how many implants you need. The implant will be set into place and your gums are closed with stitches. It will take three to six months for healing (some Plate Form implants are immediately ready for restoration without the long healing process).
Subperiosteal Implants
If there's not enough bone width or height for the Root Form or Plate Form implants, the Subperiosteal implant is recommended. The Subperiosteal implant is custom made to rest on top of your jawbone and under your gums like the Plate Form implant, but the Subperiosteal implant is placed through one of two special methods.
The first method of placement involves your cosmetic dentist making an impression of your jawbone. After you've received anesthesia, your cosmetic dentist exposes your jawbone and takes an impression of it. The impression is used by a dental laboratory to make a custom-fit implant for your jaw. The next procedure, after your custom-fit implant is created, is to again expose your jawbone and place the implant. Your gums are then closed with stitches and replacement teeth are installed.
The second method of placement requires a CAT scan of your jawbone. Through computer modeling techniques, a model of your jawbone is made from the CAT information. The next procedure, after your custom-fit Subperiosteal implant is created by a dental laboratory, is to again expose your jawbone and place the implant. Your gums are then closed with stitches and replacement teeth are installed. How to choose the color of dental implants?
When considering dental implants a common question is how white the dental implants should be. Usually, the answer is to whiten your natural teeth to either the level of whiteness you want or to the brightest they can be. Your cosmetic dentist will then have the dental implants made to that color. Teeth are of course not monochromatic, so typically more than one color is used to create a very natural look. This color variation is critical in avoiding fake or artificial looking teeth. It is the internal contrast of colors that help create vitality. The internal play of light on the porcelain in the restoration helps to create this vitality. Surface texture is also very important, and helps to break up light reflections and make the dental implants look more natural.
There is no one standard system in the dental field to measure and determine tooth color. The most often heard about, however, is the Vita shade guide. This guide divides tooth color into four basic shade ranges:
A (reddish brown)
B (reddish yellow)
C (gray)
D (reddish gray).
In the A range there are five levels of darkness. Ranges B, C and D, each have four levels.
Not all of your teeth are the same natural color. Usually your eye teeth tend to be darker than the others, your front teeth are typically the whitest, and molars tend to be a shade between the two. The goal for everyone is to achieve their individual optimum whiteness while still looking natural.
Most dentists will show you a shade chart (like the above mentioned Vita Shade Guide) for you to pick from. Keep in mind, with a good cosmetic dentist this is merely a starting point. Other considerations when determining the color of dental implants for each patient are your complexion, hair color, the color of your natural teeth and even your eye color. Types of Tooth Bonding Procedures
There are two types of bonding. What type is indicated in your situation depends upon whether you have a small area or a larger area that requires correction.
For small corrections
These are one appointment fillings which are color-matched to the tooth and are bonded to the surface for added strength. These are most appropriate for small fillings and front fillings as they may not be as durable for large fillings.
For larger corrections
Dental lab-created tooth-colored fillings require two appointments and involve making a mold of your teeth and placing a temporary filling. A dental laboratory then creates a very durable filling to custom-fit the mold made from your teeth. These fillings are typically made of porcelain. The custom-fit filling is then bonded to your tooth on your return visit. This type is even more natural looking, more durable and more stain resistant. Who is a candidate for tooth bonding?
If you have close, small gaps between your front teeth, or if you have chipped or cracked teeth, you may be a candidate for bonding. Bonding is also used for patients who have discolored teeth, uneven teeth, gum recession or tooth decay. Bonding material is porous, so smokers will find that their bonding will yellow. If you think you are a candidate for bonding, discuss it with your dentist. Overview of dental bridge procedure
If you a space from a missing tooth, a bridge will be custom made to fill in the space with a false tooth. The false tooth is attached by the bridge to the two other teeth around the space - bridging them together.
How is dental bridge accomplished?
Your cosmetic dentist will prepare your teeth on either side of the space for the false tooth. You will be given a mild anesthetic to numb the area, and the cosmetic dentist will remove the an area of each abutment (teeth on either side of the space) to accommodate for the thickness of the crown. When these teeth already have fillings, part of the filling may be left in place to help as a foundation for the crown.
The dentist will then make an impression, which will serve as the model from which the bridge, false tooth and crowns will be made by a dental laboratory. A temporary bridge will be placed for you to wear while your bridge is being made until your next visit. This temporary bridge will serve to protect your teeth and gums.
Your cosmetic dentist may have you use a Flipper appliance. A Flipper is a false tooth to temporarily take the place of a missing tooth before the permanent bridge is placed. A Flipper can be attached via either a wire or a plastic piece that fits in the roof of your mouth. Flippers are meant to be a temporary solution while awaiting the permanent bridge.
On your second appointment, the temporary bridge will be removed. Your new permanent bridge will be fitted and checked and adjusted for any bite discrepancies. Your new bridge will then be cemented to your teeth. How much do dental bridges cost?
The average cost of a single fixed bridge depends on many factors, from which region you're in to how many and which type of bridges are needed. Typically dental bridge cost ranges from $500-900 per tooth. Dental insurance typically pays for about half of the cost of the bridge. Pros and Cons of a Dental Bridge
Advantages of dental bridges:
Bridges are natural in appearance, and usually require only two visits to your dentist. If you maintain good oral hygiene, your fixed bridge should last as many as ten years or more.
Disadvantages of having a dental bridge:
It is common for your teeth to be mildly sensitive to extreme temperatures for a few weeks after the treatment. The build up of bacteria formed from food acids on your teeth and gums can become infected if proper oral hygiene is not followed. TOOTH CROWNS
What are Tooth Crowns?
Grinding your teeth, an improper bite, age, fillings and tooth decay can all be contributing factors in the wearing down, cracking or breakage of your teeth. Dental crowns cover the entire visible surface of your affected tooth and add strength, durability and tooth stability. Types of Tooth Crowns
There are basically three types of crowns, those made of gold, ceramic crowns and ceramic-veneered gold crowns. Gold and metal-ceramic crowns are extremely durable and are normally used in molars, where the forces from chewing and grinding are most prevalent. Ceramic crowns are used primarily for front teeth, since they can best resemble the natural tooth color.
Resin and Porcelain Crowns
The new reinforced resin or bonded all-porcelain type of crown has the nicest appearance. This crown can be made from pure ceramic or a new reinforced composite resin, and is almost indistinguishable from natural teeth. The new bonding technology involved provides an exceptional bond your tooth. It is metal-free, and thus satisfies the needs of patients with metal sensitivities. When correcting your back teeth with bonding, the cosmetic dentist will perform a tooth colored onlay. This type of procedure is used to correct only those parts of the tooth that are in need. This is a metal-free procedure.
Crowns Made of Gold
Gold crowns are appropriate when appearance is not a priority to you. The gold metal is extremely workable making gold crowns a more precise fit than any other type. While there exists a slight possibility of chipping with porcelain crowns, gold crowns provide no such possibility.
Porcelain and Metal Crowns
For a very natural appearance, porcelain fused to metal crowns are the answer. However, they have a metal substructure and require an opaque below the porcelain. This can make the translucency of natural teeth difficult to replicate. Occasionally a darker line will be visible at the edge of the crown, near to your gum when it recedes with age.
Types of Porcelain
There are basically two types of porcelain you're likely to hear and read about most - the felspathic and pressed ceramic porcelains. The felspathic type is the original method that has been around for 20 years. A Ceramist in a dental lab bakes porcelain onto tin foil and then heats it in an oven. The Ceramist is able to create tints and opaques inside the porcelain to give the natural look we seek.
Pressed ceramic is created from a single ingot. The single ingot is milled in one piece to create the desired shape. The stains and opaques are applied only to the surface of the porcelain to give a natural look. How much do tooth crowns cost?
Expect to pay more for porcelain crowns because they are usually more time-consuming than gold crowns. Porcelain, porcelain over metal and gold crowns average between $600. to $3100. each in total cost.
The new reinforced resin or bonded all-porcelain type costs more than other types, require more skill from your dentist and the lab, and may exceed your insurance plan coverage for crowns.
Generally speaking, the price of tooth crowns increases with the number of in-office treatments required by the patient. Dental insurance does not typically cover all the costs of the tooth crown procedure. |
